| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| How to get more relief on a neck with truss rod loose? http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=53676 |
Page 1 of 1 |
| Author: | davea [ Thu Nov 12, 2020 6:47 pm ] |
| Post subject: | How to get more relief on a neck with truss rod loose? |
I bought a 2020 Les Paul Studio with nothing on it and added the tuners bridge and electronics myself. I have loosened the nut on the truss rod all the way and the strings still buzz on the fret next to the one I am fingering. I have raised the bridge pretty high just to see if I could get rid of the buzz, but no joy. Anyone know if there is a way to get the neck to give more relief? |
|
| Author: | Chris Pile [ Thu Nov 12, 2020 8:30 pm ] |
| Post subject: | Re: How to get more relief on a neck with truss rod loose? |
Sounds like the neck is overbowed - not underbowed. Take a picture? |
|
| Author: | Freeman [ Thu Nov 12, 2020 9:52 pm ] |
| Post subject: | Re: How to get more relief on a neck with truss rod loose? |
What is the relief and the other setup parameters (first fret and 12th fret action). What gauge strings are you using. What is the next fret clearance all the way down the neck (what is it at one, does it get bigger or smaller or stay the same?) |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|